בבחירת החומרים לחתימת הטבעה, לא רק שנשקול את פונקציית היישום, אלא גם עלינו להיות מרוצים בתהליך ההטבעה ובבקשת פונקציית תהליך המעקב . בואו נסתכל על הבקשה הבסיסית להטבעה לנתונים כדלקמן.
1. יש פונקציית יצירת חותמת טובה לחלקים להטבעה
For the forming process, such as stretching, bending, step difference, convex hull, etc., the data should have a good stamping forming function, that is, it should have good crack resistance, good moldability and formability, otherwise the product will easily deform , Break, etc., causing the difficulty of repairing the model. For separate processes, there is a certain℃of פלסטיות בנתונים המבוקשים .
2. חלקי ההטבעה הם בעלי איכות נומינלית גבוהה יותר
שם המסמך צריך להיות חלק, שטוח ונקי מפגמים . החומרים באיכות נומינלית טובה אינם קלים לשבירה במהלך הדפוס, וזה לא קל לשרוט את התבנית {}} האיכות הנומינלית של החלקים היא גם טובה {}}}
3. סובלנות העובי של נתוני חלקי ההטבעה אמורה להתאים לתקנים הלאומיים
Since the certain mold gap is only used for data in the certain thickness category, if the thickness tolerance of the data is too large, it not only directly affects the quality of the part, but also may lead to the presentation of the finished product. In the process of correcting zigzags and reshaping, there may be damage to the mold or the press due to the excessive thickness deviation.
